Fargo HDP5000 Card Printer

With the Fargo HDP5000, ID cards do more than protect your organization — they reflect its pride. HDP5000 produces ID cards with the highest image quality available.

By printing a reverse image on the underside of HDP® Film, then fusing the film to the card surface, the HDP5000 creates an image quality that looks more like a sharp glossy photo than an ordinary ID badge.

Printing on film instead of directly on the card means that the uneven surface of technology cards doesn’t compromise image quality. The HDP5000 can print up to the edge of smart chip contacts, and over-the-edge of the card.

Relative Information

- Fargo HDP5000 Card Printer

Optional Accessories

   - Card lamination module – single-sided
    or• Magnetic stripe encoding dual-
    sided (simultaneous),
   - 200-card input hopper,
   - Smart card encoding
    (contact/contactless)
   - Door and cartridge locks,
   - Magnetic stripe encoding
   - Dual-sided printing,
   - Printer cleaning kit.

Ideal Applications

   - Schools,
   - Small corporations,
   - Parks and recreation,
   - Health clubs,
   - Recreational facilities,
   - Ski lodges and resorts,
   - Loyalty programs and more.

Product Specifications

Print Method	\|	HDP Dye-Sublimation/Resin Thermal Transfer
Resolution	\|	300 dpi (11.8 dots/mm)
Colors	\|	Up to 16.7 million / 256 shades per pixel
Print Speed:**	\|	38 seconds per card (YMC with transfer)* 46 seconds per card (YMCK with transfer)* 70 seconds per card (YMCKK with transfer)* 50 seconds per card (YMCK with transfer and dual-sided, simultaneous lamination)* 75 seconds per card (YMCKK with transfer and dual-sided, simultaneous lamination)*
Accepted Standard Card Sizes	\|	CR-80 (3.370” L x 2.125” W / 85.6mmL x 54mmW)
Accepted Card Thickness	\|	Print only: .030" (30 mil) to .050" (50 mil) / .762 mm to 1.27 mm Print/Lamination: .030" (30 mil) to .050" (50 mil) / .762 mm to 1.27 mm
Print Area	\|	Over-the-edge on CR-80 cards

Models: